Tuesday, May 22, 2018

F3841 1" Air impact wrench

Item No. F3841  1 inch heavy duty powerful Air impact wrench






Source of information:

https://fingo.en.taiwantrade.com/product/air-impact-wrench-this-version-benefits-lie-in-light-weight-available-on-truck-tires-for-disassembly-of-screws-and-nuts-no-f3841-1449686.html




This powerful 1 inch air impact wrench was popular use for tire disassemble and lock up  the screw of the truck and passenger car operation. The free speed 3,500RPM and max. torgue 3,800NM are suitable for truck tires application. Also the traditional hammer unique design to extend the lifetime longer.

The mechanism was pin-less type and anvil was 6 inch long. Also the precise bearing and special plastic cushion ring are against anti-slip and reduce vibration.


The package of air impact wrench was loading in the more stronger cardboard carton as under picture:


Hope you are interest to choose item no.F3841 1" air impact wrench in your service center successfully.


For safety, the screws and nuts on the tire must be locked tightly.
But in dismantling the tire, this would be a small challenge.
What can we do to quickly and easily dismantle it?

Now we introduce you an Air impact wrench:F3841
It is very light, so people who have no strength are not afraid they will not be able to use it.
The F3841 Air impact wrench has a very powerful power torque.
Making it ideally suited for truck tire to remove screws and nuts.

The low noise of F3841 when it is used is a great tool for people who hate noise.
In addition, the special design of the F3841 hammer makes it a long service life.So you do not have to worry about it is excessive consumables.

For a person dismantling a tire.Certainly need a good Air impact wrench.
A good Air impact wrench can make your efficiency better.
So that you can easily complete what you want to do.
Whether you want to dismantle a tire or restructure a tire, F3841 is your best helper.
Because of its powerful power and light weight, low noise.
F3841 can save you time and effort.

Air impact wrench,Truck tires, F3841


    Taiwantrade CALHERMIT ENTERPRISE CO., LTD.








    TUVRheinland





Monday, May 21, 2018

Glueless tube patches



Product specification:


Most of racing bike of tire was very narrow designed to reduce the air resistance when bike runs on the road. The thickness of glueless patch was just 0.8mm thinly.
The high viscosity adhesive rubber fixed up the nail puncture of racing tube. Then stop the air leakage exactly.

Some of glueless tube patches are assemble in the box together to sander paper and nylon tire lever for repair kit convenience. This DIY kit was popular to combine it in the bike tool repair bag to supply the solution in case of emergency.

Glueless tube patches: The tube patch was fine adhesion force without cement.



F0186
F0187
F0189



25mm round style with black color, 6 pcs/sheet..
6 pcs patch + 1 pc sander paper, package in flat box.
6 pcs patch +2 pcs tire lever + 1 pc sander paper


Feature of product:


The glueless patch was not need to use any rubber cement to repair tubeless tyre and racing bike tube. It was a special fomular to arise more glutinous patch to repair nail puncture.

Bicycles are so ubiquitous that almost everyone has used it.
If it was accidentally punctured tire, it would be a very troubling thing.
But if you have Glueless tube patches, this will not be your problem.You can repair the holes on the tires yourself.

Lightweight and easy to carry, is a good helper for repairing bicycle tires
Make your tire life longer.
Do-it-yourself repair tires can save you some time and money.
Do not have to look around for repairs,and the maintenance costs that are not cheap.

The use of Glueless tube patches is quite simple, so you don't have to worry that you won't use it.
Glueless tube patches are currently available in three different formats and you can follow your needs.

Good helper for tire repair, Tires patch,bicycle



     Taiwantrade CALHERMIT ENTERPRISE CO., LTD.









Sunday, May 20, 2018

Cushion gum Product Description

You always save time and energy resources




Source of information: 



Item no. F425

Professional A quality tire repair products.

Fingo brand high quality cushion gum will be a great benefit for the tire repair retreaded procedures to save cost of operation time and power energy more than
15%.

The successful key point of retreaded tire will be a exact vulcanization between tread belt and tire body. So how to choose the intermediate cushion gum which was an important key element.

Item No.F425 Cushion gum has running in the tire retreaded production many years. So we are improve the formula good for tire vulcanization in the treaded process.


Features:

1. Vulcanizing temperature: 110 - 125. Max. 125.
2. Vulcanizing time: total 2-1/2 hours for light truck tires. 3 hours for truck tires.
3. Stock time: within 6 months.
4. Solution: cushion gum with SBP solvent.


Specifications:


Size ( thickness x width )
Package
1.5mm x 250mm
1 kg/ roll
2.5mm x 250mm
1 kg/roll
3.0mm x 280mm
5 kgs/roll

Packing cover sheet will be green colour normal and available blue colour request.


As long as it has its existence, it can be more convenient and save a lot of time in retreading tires. As long as this skill exists, it can save a lot of energy.

The F425 is an indispensable tool for tire retreading.Do not underestimate it because of its appearance.
During refurbishment, because of the relationship between F425, new tires are safer and refurbishment speed becomes faster.

Don't think it's hard to use, for people who want to reduce runtime.
Those who want to retread tires at a lower cost will be a good helper for you.
You don't have to worry about the product is not guaranteed,all products here are certified.
The F425 comes in 3 different sizes, so you can choose the right size for your specific product needs.
After the tires can be refurbished, they can also reduce some of the discarded tires.
Large waste can be reduced and it can be more environmentally friendly.
Ability to take into account both environmental protection and corporate profits.

Good helper for tire repair, Tire adhesives,Inner tubes and tires



Product Instructions Videos:





Saturday, May 19, 2018

A61 Tire plug patch






A61  Tire plug patch


The tire plug patch was one of idea set which was combined tire patch together to a stem for puncture repair. The size of patch have 26mm, 36mm, 50mm, 60mm and100mm round style with stem diameter 4mm, 6mm, 9mm and 14mm available wide range.

Most of tire puncture was impaled by the nail or metal parts when run on the road. This action will be leaked the air from tire and reduce the tire pressure in normal running conditions. 

How to use the tire plug patch correctly ? 
1. First take off the nail by plier tool from outside of tire tread. 
2. Then disassemble the tire and wheel rim by tire chnager.
3. Clean the hole by handle rasp tool indeed.
4. Use rubber cement on the puncture area lightly.
5. take off the cover sheet of plug patch and put the needle through puncture hole.
6. Fix the patch on the tire by roller stitcher.
7. Pull the stem out of tire and cut it by knife. 

After finish repair precedure, then may use some soapsuds to sprinkle on the tire to test it.

It is good result no any bubble happen on the tire. Then the tire of car run on the road which will rise the temperature to vulcanize the patch on tire exactly.


After finish repair precedure, then may use some soapsuds to sprinkle on the tire to test it.
It is good result no any bubble happen on the tire. Then the tire of car run on the road which will rise the temperature to vulcanize the patch on tire exactly.

The A61 has 8 different specifications. You can choose the right tool according to different product requirements.
It is quite close to our lives, and the main repair target is the motorcycles and cars we most often use on weekdays.
It is not complicated to use, you can follow the instructions to repair tires yourself.
It is a very safe and easy to carry the patch tool, you can safely use.


Tires patch, Good helper for tire repair, Tire repair


     Taiwantrade CALHERMIT ENTERPRISE CO., LTD.




    CALHERMIT ENT CO., LTD.






   TUVRheinland


Thursday, May 17, 2018

DIY Tire repair kit item no. A59

Source of information: 




Hi my friend,


Would like to introduce one of popular DIY tire repair kit for your study. Most of driver also have more experience to meet the tire puncture by nail or other metal parts on the road etc.


How to repair the puncture tire when you drive the car or motorcycle out of city and could not find the tire repair shop especially ? How to recover the car tire or motorcycle tire on normal condition ?



So you may prepare one set of tire repair kit no.A59 as following picture:




This DIY tire repair kit was suitable for tubeless tire puncture repair by yourself. You may try to learn the repair procedure as following:

How to use:


1.Pull out the nail from tire.


2.Clean the injury with the open end inserting tool.Following

 the direction of the injury and twist 3 times in hole inside.


3.To easy repair, using a liffle of wax or solution on the screw 

head of thetool and insert to the injury hole.


4.Feed the tire seal string to open end inserting tool.Also using 

A liffle of wax or solution on the surface of seal string.


5.Insert the tool by hand into injury through the tire form

outside to inside about 1 cm.Then twist it. Put out the tool directly.



Hope you can solve the possible problem by yourself one by one successfully.


When you go out, if there is a problem with the car tires, the A59 will be your best helper, allowing you to deal with tyre damage without anybody's help.

If you are a person who likes to play everywhere, then you must not miss the A59 product. It is a small, easy to carry and easy to use tool.
After all, nobody wants to find places where tires can be repaired when playing.

Good helper for tire repair, Tires patch, DIY, A59, Assembly Tools, Hand Tools


Product Instructions Videos:




     Taiwantrade CALHERMIT ENTERPRISE CO., LTD.







Friday, May 11, 2018

Experience of exhibition




Experience of exhibition 

Remember the Taipei international cycle show 2015 in Taipei, Taiwan, It was a very successful exhibition for bike and accessories in the world. We applied the booth firstly because many exhibitors wanted to reserve the booth. Then we have to make a plan to follow up many things before show.

The main point was focus company products which will present top view and new design exactly. Also collect more samples, prices and make an idea for booth lay-out possible.

After ready, we was welcome the visitor from the world to our booth. How to catch his eyes for first image ? It was a key point just few minutes to walk through our booth. May we have any good idea from you ?

The visitor want to find target goods and new idea from others. The exhibitor want to contact with right customers and show their focus products. So the exhibition was like a bridge between visitors and exhibitors in good opportunity.

Then we have to follow the visitor up their inquiry continually after show within few days. Also send more product brochures and connect with him by internet phone call. if necessary, will arrange an appointment with customers for negotiation continually.

Hope open a join bridge between you and us in the future.

In an exhibition, people can actually come into contact with them. The time spent talking with them may not be long. How can we be in such a short time?Consumers are impressed with us.
Let customers have a great interest in the company's products,And leave the contact method. After that, they will continue to provide them with the latest products and services.

People will not want to be nasty, but to attract people's attention.We need to smile and humorous speaking skills.

Retreaded tires, exhibition, Taipei, International, Bicycle Show


   Taiwantrade CALHERMIT ENTERPRISE CO., LTD.




    CALHERMIT ENT CO., LTD.

















Wednesday, May 9, 2018

F425 Cushion gum



Source of information: 


F425 Cushion gum

The retreaded tyres was recycle the used tyre based on good conditions of casing structure  exactly. It was solve so many problems of used tyre in the world. 

The cushion gum joined the tyre casing and pre-cured tread belt link process exactly. 

It was a key material for retreaded tyre successfully.

Three thickness 1.5mm, 2.5mm  and 3.0mm of cushion gum was choosed for retreaded tyre process.

F425 cushion gum could be save vulcanizing time and low temperature based on special formular. 

So it could be save tyre retreaded cost more.

As long as it has its existence, it can be more convenient and save a lot of time in retreading tires. As long as this skill exists, it can save a lot of energy.

The F425 is an indispensable tool for tire retreading.Do not underestimate it because of its appearance.
During refurbishment, because of the relationship between F425, new tires are safer and refurbishment speed becomes faster.

Don't think it's hard to use, for people who want to reduce runtime.
Those who want to retread tires at a lower cost will be a good helper for you.
You don't have to worry about the product is not guaranteed,all products here are certified.
The F425 comes in 3 different sizes, so you can choose the right size for your specific product needs.
After the tires can be refurbished, they can also reduce some of the discarded tires.
Large waste can be reduced and it can be more environmentally friendly.
Ability to take into account both environmental protection and corporate profits.

This product has two different colors of blue and green packaging.
The product itself has two colors, blue and yellow.

It is Cushion gum,Item No.F425,it like using wrapped in nori with rice,look like Sushi,but it can’t eat,it’s a tyre repair tool.


Good helper for tire repair, Tire adhesives,Inner tubes and tires



     Taiwantrade CALHERMIT ENTERPRISE CO., LTD.